Industrial Revolution A Time Of Social And Economic Change

The Industrial Revolution was a time of social and economic change which emphasized the power of humanity over nature. It was also an era of change which consisted of inventions that were mass produced to make life easier between 1750 and 1914. Although the Industrial Revolution led to efficient transportation and made Great Britain the center of world commerce, only the upper class got to truly enjoy that. The Industrial Revolution had spread to all around the world so the impact was more brutal. People that were not as fortunate and did not have as much money had to work in dangerous conditions to make a living. The new achievements and innovations brought about during the Industrial Revolution caused more harm than it helped because even though it lead to human advancement with new inventions, it also led to greater social inequality because of the enormous economic gap between social classes, the clash between the two ideologies, communism and capitalism, and environmental issue s. The Industrial Revolution led to social inequality because of the economic discrimination between social classes. The Industrial Revolution introduced new resources and lead to the production of many factories. This marked the beginning of the middle class starting to oppress the working class. The bourgeoisie, which consisted of bankers, factory owners, entrepreneurs, and other business owning people, started to use the development of factories to climb the social ladder. As it has beenShow MoreRelatedIndustrial Revolutions During Europe During The Industrial Revolution1298 Words   |  6 PagesIndustrial Revolution in Europe Before the industrial revolution, Europe was mostly dominated by farmers but as the industrial revolution progressed this changed dramatically. Industrial revolution had a significant impact in the process by making new demands that shaped the way of life through increased competition and technological innovation. Generally, it was a historical period that sparked in a stroke a number numerous changes in the economic, social and political dimensions. It is consideredRead MoreThe Social Conditions Of The 19th Century Essay1320 Words   |  6 Pagesin the 19th century while the world is experiencing major social and economic changes following the French and Industrial Revolutions. These world changing events are mostly causing plagues for the working class. These 19th century conditions cause the people to revolt against the social reforms of the existing world and reveal the need for a new social structure. The newly emerging Industrial revolution results in a shift within economic c lasses, which are the bourgeoisie and proletariat. The 19thRead MoreThe Causes And Effects Of Europe945 Words   |  4 Pagesa constant theme of revolutions and counterrevolutions across space and time that have shaped the very foundations of societies across the expanse of the continent. Furthermore, these revolutions occurred in many different spheres of daily life. For instance, some revolutions featured prolonged periods of violent political upheaval while others featured a more subtle revolution, changing the very social fabric of Europe. In addition, some revolutions centered on economic change while still othersRead MoreIndustrial Revolution Essay1051 Words   |  5 PagesAs the Industrial Revolution took place, many drastic changes†¦ technological, social, economic, and cultural also occurred. The Industrial Age brought about a new order that gave rise to the world of skyscrapers, factories of mass-production, and electronic devices that we are accustomed to today. Th e everyday lives of ordinary people underwent a dramatic change for the better. Before the Industrial Age, people lived very simple and hardworking lives. Any food or clothing they had was produced byRead MoreIndustrial Revolution Essay734 Words   |  3 PagesDue to the Industrial Revolution, many changes started occurring in this new era such as the factories began to use more mechanics, limiting skill needed to produce products as well as hastening the harvesting of raw materials. Secondarily there was a huge standard of living and wage drop in cities due to urbanization which occurred after the factories created an abundance of jobs. Also, there was a huge shift in the population and there was a massive population growth due to the excess food andRead MoreHistorical Events And Their Impact On The World952 Words   |  4 Pagespast. The Industrial Revolution during the 18th to 19th century, the Industrialization of the 20th century, World War I and World War II, all left traces and have greatly impacted the way we live in today particularly out living standard. The goal of the paper is to discuss the effects of these historical events on the way we live in terms of living standards. The First Industrial Revolution The Industrial Revolution during the 18th to 19th century was referred to as the First Industrial RevolutionRead MoreFrench Revolution1740 Words   |  7 PagesTHE FRENCH REVOLUTION The French Revolution, which erupted in 1789 marked a turning point inthe history of human struggle for freedom and equality. It put an end tothe age of feudalism and ushered in a new order of society. An outline of  this revolution will explain to you the kind of turmoil that occurred inEurope. This revolution brought about far reaching changes in not onlyFrench society but in societies throughout Europe. Even countries in othercontinents such as, India, were influencedRead MoreThe Importance of the Industrial Revolution649 Words   |  3 PagesThe Industrial Revolution was a period of time consisting of great technological advancements that allowed for greater production of goods. Although some changes supported the increase of the quality of life, most changes affected the life of the lower class people. The Industrial Revolution had the greatest amount of social effects as opposed to economic and political effects because of the dramatic changes in working conditions, soci al classes, and living conditions. Working conditions was a bigRead MoreThe Effects of the European Industrial Revolution785 Words   |  3 PagesThe industrial revolution was when changes in agriculture, manufacturing, work ethics, transportation and technology became more advanced. The revolution made social economics and culture prosper. This spread during the 18th and 19th century in Europe. Europe was the first place to start this revolution because it had the resources to advance technology and it was politically stable. Most people made a living in small towns and were farmers. A large amount of people at the time were poor, and malnourishedRead MoreIndustrialization in Great Britain: A New Era951 Words   |  4 Pagestransition included a change in hand production to machine production, brand new chemical and iron production processes, an improvement in water power, major increases in the use of steam power, the development of machine tools, and the conversion towards coal as the major source of fuel. Not only was â€Å"he Industrial Revolution an evolving transformation in many sectors of the economy† (Atkins 1), but across the board, aspects of daily life were changed by the Industrial Revolution, and it led to not

Sex Toys And Their Key Functional And Semiotic Components

This essay will give a detailed analysis of sex toys (for this essay the broad scope of sex toys will refer to dildos (primarily), vibrators and variations of dildos including strap-ons) as an item of material (consumer) culture through a historical and social analysis. The paper will discuss sex toys and their key functional and semiotic components with reference to their cultural purpose, their popularity and consumer interpretations and expectations. This essay will address social theory and the cultural work of objects (in this case a sex toy) and will attempt to analyse and highlight issues related to the use and interpretation of dildos. A dildo is a phallic shaped object intended for bodily penetration during masturbation or sex with a partner or multiple partners (dictionary.com, 2014). Early forms of dildos (made from stone, antler, etc.) date back to the Upper Paleolithic period (Marshack, 1972) and 3rd Century Greece. Modern-style dildos began surfacing around the 19th Century (Deka, 2005; Fahs Swank, 2013) and were made from rubber. The word dildo is loosely believed to derive from the Italian word diletto, which means to delight (Fahs Swank, 2013; Statemaster.com, 2014). Dildos historically were used as a cure for female hysteria (known today as sexual frustration) (Maines, 1998; Omori Slick, 2007; King, 2011; Castleman, 2013; Fahs Swank, 2013) and other complaints. Dildos were originally marketed as a medical aid in the 1880s, primarily available

The Effects Of Drinking Water On The United States

It is often believed that unsafe drinking water is strictly a critical health issue in impoverished third world countries. However, in recent years in the United States, one of the most developed countries in the world, we are experiencing multiple incidences of widespread public water contamination. In 2014, news stations across America were flooded with the devastating water crisis in Flint, Michigan and though this is the most recent occurrence, it is not an isolated incident. Though Flint was the most widely recognized incident, in the same year two other distressing cases of unsafe tap water also occurred in two other United States cities. While several of these cases of water contamination in the U.S. have been unintentional, other†¦show more content†¦During the late 60’s and early 70’s a series of studies were conducted on public water supplies due to health concerns, which concluded that many treatment facilities were inadequate (2000). In an effort to address public health concerns, Congress enacted the Safe Drinking Water Act (SDWA) of 1974, which was amended in 1986 and 1996 (2000). The SDWA outlines the federal standards for public drinking water, waste management, protection of drinking water sources, and the financial infrastructure for projects (Tiemann, 2014). The Environmental Protection Agency (EPA) is responsible for enforcing policies and regulations concerning public drinking water. The EPA estimates that the U.S. contains approximately 155,000 public water systems (Environmental Protection Agency, 2015). The three main water systems include community water, which include residential buildings, transient non-community water, which include campgrounds and gas stations, and non-transient non-community water, which include hospitals and schools (Environmental Protection Agency, 2015). Community water comes from surface water, such as rivers and lakes or from ground water in wells (Centers for Disease Control and Prevention, 2014). However, individual water systems, which include streams, ponds, bottled water, and privately owned wells, are not regulated by federal standards (Centers for Disease Control and Prevention, 2014). The EPA

Business Environmental Analysis Samples †MyAssignmenthelp.com

Question: Discuss about the Business Environmental Analysis. Answer: Introduction Technology plays a great role in conducting the day to day operations of the business. Activities of the organization are conducted electronically because of the internet access in every company. Computers are present in every organization to complete the specific tasks. Technology at the workplace has brought a drastic change to complete the work. The technology like computers removed the workplace boundaries and also helps to take correct decisions at your workplace. So, in this report the emphasis will be given on the use of computer in the modern workplace. At the modern workplace technology is used so that the task can be completed fast and the organization can easily attain goals and objectives. Modern workplace The computer system is used to simplify the work and also to complete the work on time. Latest technology should be used by every organization, so that it can be easy for the organization to attain the goals and objectives. A computer gives knowledge to the workers about the tasks and operations that should be performed in a proper way. Computer is an important technology that should be taken into consideration by the organization to attain the success in the market (Raspotnig and Opdahl, 2013). Without the use of computer or laptop it is very difficult for an organization to maintain the records. Computer is very essential to record the transactions and also to keep a proper record of the employees who are conducting the activities in the business. Computer is defined as an electronic machine that helps to store, organize and search the information. The important components of computer are hardware and software. The computer system has various modern components like primary storage, input devices, output devices and communication devices (Arachchilage and Love, 2014). Hardware and Software components The hardware components of the computer system are: CPU: It is considered as a hardware component of the computer system in which the manipulation of the symbols are done. The full form of CPU is Central processing unit. It stores the data and the instructions of programs temporarily before or after processing. It is considered as a brain of the computer. CPU is considered as an electronic circuit that carries the instructions which are given by the computer. CPU executes instructions which are given by a computer program and also it take into consideration basic arithmetic and logical operations. It is analyzed that the speed and efficiency of the computer is dependent on the CPU. The basic function of CPU is that it controls all the parts of machines and sends time signals. It helps to transfer the data between the various devices and decodes the instructions. Also it executes programs stored in the memory and performs communication among the Devices (Gartshore and Blake, 2014). Computer Keyboard: It contains many mechanical switches which are called keys. The keyboard can be wireless and also connected with wires. Wireless keyboard are connected via Bluetooth. It is an input device which helps to enter the letters, numbers and also the symbols into a computer. It is known as one of the common technique which is used for writing. Mouse: It is considered as a pointing device that has two dimensional motions that are related with the surface. It helps to control the graphical user interface. Mouse is designed in such a manner in which two buttons and a scroll wheel is seen (Grkaynak, Yilmaz and Taskiran, 2014). The software components of the computer system are: Operating system software: It helps to load all the programs at the time when the computer starts. It uses the characteristics of a computer without having the knowledge of the hardware information. The operating system helps the computer to have the knowledge of bits and bytes. All the functions of a computer system can be conducted by using the operating system software. Without this software it will be difficult to operate the activities in an effective manner (Lee, Connor and Bourgoin, 2014). Application software: This software can be used when the operating system is loaded in a proper way. It contains many programs like word processing programs, spreadsheets and databases. Microsoft word is considered as a part of word processing applications (Larson, Menagarishvili, Rubinoff, Smith and Waters, 2016). Advantages and threats of computer in the workplace There are various benefits and advantages that are connected with the computer. Computer helps to record the transactions in an accurate manner. Computer is a technology that simplifies the work of an individual. It reduces the workload of the employees or the workers who are working in the company. There are various software that are used with the help of the computer, in which the proper record of the files, documents are kept. The information of the businesses is organized in a very proper manner (Galegher, Kraut and Egido, 2014). The large amount of data can be stored in a convenient and inexpensive way. The computer has the ability to organize the organization files in an efficient manner, so that there can be enhancement in the time management and also in the level of productivity. For example: It is very easy for the company to make the training material. The operations of the business can be completed in a speedy way and also it help to collect the consumer feedback, ordering the raw material. It helps the organization to save time and enhances the better quality outcomes. The high sales and profits can be generated by using the company website. There are many businesses that conduct their operations online and allow the customers to shop for their products. These all activities can be taken into consideration by using the latest technologies like computers (De Cocker, De Bourdeaudhuij, Cardon and Vandelanotte, 2016). The main threat that is emerged by the use of computers in the workplace is concerned with the loss of confidential information. It is seen that confidential information are leaked from the computer. The company or the manager saves information in the computer and when it is leaked it is a threat for the organization. Loss of information can also reduce the profitability of the organization (Nelson,Phillips and Steuart, 2014). Physical Danger Ergonomics is considered as a scientific study of a person and also their relation with the working environment. The individual in the organization suffers pain at the time of conducting the operations of the organization. There are many factors that are concerned with the ergonomically related problems. The person who sits for a long time in front of computer faces various different problems. If an individual do not work or conduct its operations with a good posture, then it is very difficult to survive in an organization. Good posture helps the individual to work in effective way. If the person or an individual gives excessive force on the body parts, then it can result in excessive pain (Eijckelhof, et al., 2013). For example: Poor posture can be determined if the keyboard and the monitor is not kept in a straight line from the seat. The awkward position at the workplace can lead to severe stress in the neck, wrist and shoulders. So, to conduct the operations or the activity it is very essential for an individual to carry a good posture. It is seen that if an individual conducts its operation in a same position for a long time then it can enhance the possibility of injury. The organization should give comfortable seats, so that the employees can sit in a good posture and can conduct their task effectively (Chory, Vela and Avtgis, 2016). It is very essential for an individual to have a proper knowledge of the positions that can minimize the risk of injury. It is seen that there are many individuals who faces the severe problem of neck pain. It is due to the wrong position in which the individual is working. It is very important for an individual to be aware about the risk factors that can result in musculoskeletal problems. If an individual is aware then it can be easy to avoid the problem at the time of using computer (Hoepman, 2014). Data protection legislation Data protection legislation requires every organization to take into consideration the personal information so that the essential principles concerned with privacy and security can be implemented. It is very essential to make sure that the information is accurate and can be handled according to data protection rights of an individual. It is the duty of information commissioner officer to take into consideration the rights that assures about the information of an individual. The principles that are related with privacy and disclosure should be used to handle the personal information of an individual. Conclusion By taking into consideration this report, it is concluded that computers are the essential technology that should be adopted by every organization. It is very beneficial and also helps the organization to maintain the records in efficient way. In the recent scenario, it is analyzed that without computer or laptop not even a small business can survive. Computer is an essential requirement for every organization to sustain in the competitive environment. References Arachchilage, N.A.G. and Love, S., 2014. Security awareness of computer users: A phishing threat avoidance perspective.Computers in Human Behavior,38, pp.304-312. Chory, R.M., Vela, L.E. and Avtgis, T.A., 2016. Organizational surveillance of computer-mediated workplace communication: Employee privacy concerns and responses.Employee Responsibilities and Rights Journal,28(1), pp.23-43. De Cocker, K., De Bourdeaudhuij, I., Cardon, G. and Vandelanotte, C., 2016. The effectiveness of a web-based computer-tailored intervention on workplace sitting: a randomized controlled trial.Journal of medical Internet research,18(5). Eijckelhof, B.H.W., Huysmans, M.A., Garza, J.B., Blatter, B.M., Van Dien, J.H., Dennerlein, J.T. and Van Der Beek, A.J., 2013. The effects of workplace stressors on muscle activity in the neck-shoulder and forearm muscles during computer work: A systematic review and meta-analysis.European Journal of Applied Physiology,113(12), pp.2897-2912. Galegher, J., Kraut, R.E. and Egido, C., 2014.Intellectual teamwork: Social and technological foundations of cooperative work. Psychology Press. Gartshore, E. and Blake, H., 2014. Development and evaluation of a computer based e-learning tool to enhance knowledge of workplace wellness in a healthcare setting. Grkaynak, G., Yilmaz, I. and Taskiran, N.P., 2014. Protecting the communication: Data protection and security measures under telecommunications regulations in the digital age.Computer law security review,30(2), pp.179-189. Hoepman, J.H., 2014, June. Privacy design strategies. InIFIP International Information Security Conference(pp. 446-459). Springer, Berlin, Heidelberg. Larson, B., Menagarishvili, O., Rubinoff, A., Smith, J. and Waters, R., 2016. Technical Communication in the Workplace: Computer Science, Business, and Law. Lee, C., Connor, T. and Bourgoin, D., 2014. Human Factor Approach to Computer Documentation Design, Implemenatation, and Workplace Ergonomics.Journal of PeriAnesthesia Nursing,29(5), p.e12. Nelson, B., Phillips, A. and Steuart, C., 2014.Guide to computer forensics and investigations. Cengage Learning. Raspotnig, C. and Opdahl, A., 2013. Comparing risk identification techniques for safety and security requirements.Journal of Systems and Software,86(4), pp.1124-1151.